Monthly Archives: May 2014
DISCOUNT 10%: NEW CUSTOMERS, Charities, NHS Staff, Armed Forces
Date May 12, 2014 Author By admin Category Blackheath plumbers
Tools and materials required:Blowtorch or Pipe Soldering Iron.Heat Mat.Solder.Flux and flux brush.Fire extinguisher.Using a Blowtorch:Two methods can be used to create the high amount of direct heat needed to carry out a soldering job. The first is by using a blowtorch. The second is using an electrical pipe-soldering tool. Nearly all plumbers will use the […]
Read MoreDate May 11, 2014 Author By admin Category Blackheath plumbers
The Skirting Radiator.The skirting radiator is fitted to save space in a room and as a credible alternative to the normal type of radiator. A skirting radiator is also designed to be installed as a replacement for the wooden skirting board. Its two copper lined waterways and the outer casing are made from a single […]
Read MoreDate May 10, 2014 Author By admin Category Blackheath plumbers
When a boiler loses pressure it is rare but quite serious. The best way for the novice is to look at the fitted gauge on the boiler. If you are not confident to do this or are concerned about any plumbing issue you can call a professional service like Blackheath Plumbers who are skilled tradesmen. […]
Read MoreDate May 9, 2014 Author By admin Category Blackheath plumbers
Note: Legionella is a pathogenic group of bacteria that causes illness including flu like symptons to dizziness and vomiting and in some cases is fatal.Whilst it is a sound, tried and tested form of water heating, the immersion heater does have a down side in that it can harbor the legionella bacteria, which is a […]
Read MoreDate May 8, 2014 Author By admin Category Blackheath plumbers
The towel rail in the bathroom is normally considered to be just another fancy kind of radiator. That may be the case, but their construction actually means that they are not able to produce the same kind of heat output that is achieved by a standard radiator of a similar size. A Blackheath Plumber can […]
Read MoreDate May 7, 2014 Author By admin Category Blackheath plumbers
The corrosion inhibitor is made to be introduced to a central heating system to give some protection against the formation of corrosive rust that is the result of the reaction between the metal pipes and the water that runs through. The actual corrosive mass will sit in the bottom of radiators and will slowly eat […]
Read More